Assembly - LEAB CPC 1260 User Manual

7 Assembly

NOTE! The arrow in the middle of the potentiometer indicates the selected
characteristic.
2. To prevent accidental adjustment of the charging characteristic, stick the
supplied sticker on the potentiometer. NOTE! Ensure that the notch in the
sticker is above the LED.
ð The charging characteristic is set.
7 Assembly
Fig. 4: CPC assembly
To assemble the unit, proceed as follows:
ü Choose a cool, dry and well-ventilated assembly site.
ü Do not mount the unit directly next to or above batteries.
16 LEAB Automotive GmbH
5
mm
Notice
Device defects from incorrect installation
Incorrect installation can result in device defects.
1. Install the device in a dry and cool location.
LEAB Automotive GmbH
Thorshammer 6 24866 Busdorf