Charging Characteristics - LEAB CPC 1260 User Manual

Hide thumbs Also See for CPC 1260:

Table of Contents

5 Charging characteristics

The CPC charger contains 15 different charging characteristics which you can

select before connecting to the battery. Battery charging is fully automatic

and micro-processor controlled with a 3-stage IU

gentle and optimum charging of the batteries.

Fig. 3: Charging Characteristic

I phase: Charging with constant current

Depending on the battery charge state, the battery is charged with maximum

charging current to store as much energy as possible in the battery. After

reaching the set main charging voltage, the charger switches to the next char-

ging phase (U

the unit enters the U

NOTE! Deep discharged batteries with a voltage below 6 V or 12 V are not

charged for safety reasons.

LEAB Automotive GmbH

). If the set main voltage is not reached within max. 10 hours,

phase and reports an error.

LEAB Automotive GmbH

characteristic curve for

Thorshammer 6

24866 Busdorf

Table of Contents

Cpc 2440 Cpc 1215 Cpc 1220 Cpc 2415 Cpc 2420 Cpc 2450 ... Show all