Control Panel - Fisher & Paykel DH8060P3 User Manual

1
2
1 POWER
2 Keylock
3 SmartTouch™
control dial
4 Digital display
screen
5 Progress lights
6 Delay Start
Less/More
7 Dryness Level
8 Dry Temp
9 Wrinkle Free
!0 Signal
!1 Water Tank,
Condenser, Lint
Filter
!2 START/PAUSE
16

CONTROL PANEL

3 4
Press to turn the dryer ON/OFF.
Press to disable all buttons on the display panel, except
button. This prevents accidental button presses.
Rotate to select your desired drying cycle.
The icon illuminates to indicate the selected drying cycle.
z
Shows the following:
TIME TO GO
z
currently running.
Delayed start time of dry cycle.
z
Notifications if an error is detected or a warning is necessary.
z
The progress lights indicate what part of the cycle the dryer has
reached (
DRY, COOL
the cycle. The light for the current part of the cycle flashes, and
each one goes out as the cycle progresses.
Press
MORE
time.
Allows you to select the level of dryness for your load.
Allows you to select the drying temperature for your cycle.
Allows you to select a
This button has two functions:
Alert you that the dryer has finished.
z
Alert you to remove items once your load reaches the
z
damp dry stage.
The lights will flash when the dryer is switched on as a
reminder to empty the water filter, or clean the condenser and
lint filter. The warning light will also flash on and off during the
cycle if the filters become blocked.
Press to start or pause the selected drying cycle.
5
6 7
– the remaining time in the cycle that is
or ). All three lights are on at the start of
END
to increase and
LESS
WRINKLE FREE
8 9
!0
to decrease the delay start
option for your cycle.
!1 !2
POWER