Control Panel - Fisher & Paykel DH8060P Installation And User Instruction Manual

1
2
POWER
1
Keylock
2
SmartTouch™
3
control dial
Digital display
4
screen
Progress
5
lights
Delay Start
6
Dryness Level
7
Dry Temp
8
Wrinkle Free
9
Signal
!0
Water tank,
!1
Condenser,
Lint Filter
START/PAUSE Touch to start or pause the selected drying cycle.
!2
12

CONTROL PANEL

4
3
Press to turn the dryer on/off.
Touch and hold for two seconds to disable all buttons on the display
panel, except 'POWER'
Rotate to select your desired drying cycle.
The icon illuminates to indicate the selected drying cycle.
● ●
Shows the following:
How long the drying cycle has to go.
● ●
Delayed start time of the drying cycle.
● ●
Notifications if an error is detected or a warning is necessary.
● ●
The progress lights indicate what part of the cycle the dryer is currently
on ('Dry', 'Cool' or 'End'). All three lights are on at the beginning of the
cycle. The light for the current part of the cycle flashes, and each one
goes out when that part of the cycle is complete.
Touch 'More' to increase the delay start time for drying cycles.
Allows you to select the level of dryness for your load.
Allows you to select the drying temperature for your cycle.
Allows you to select a wrinkle free option for your cycle.
This button has two functions:
Alert you that the dryer has finished.
● ●
Alert you to remove items once your load reaches the damp/dry stage.
● ●
The lights will flash when the machine is switched on as a
reminder to empty the water filter, condenser or clean the lint filter.
The warning light will also flash on and off during the cycle if the
filters become blocked.
5
6 7 8
button. This prevents accidental button presses.
9 !0 !1
!2