Fisher & Paykel DH8060P3 User Manual page 10

Installation Options
This dryer CANNOT BE INVERTED AND MOUNTED ON THE WALL.
Your dryer can be installed one of two ways, either freestanding, or stacked on top
of a Fisher & Paykel front loading washer.
Freestanding
The dryer stands on the floor and can easily be moved into position.
Stacking
Your dryer has been designed to be able to be stacked on top of a Fisher & Paykel front
loading washer. A stacking kit MUST BE USED between the products and fitted correctly to
the washing machine and dryer, as per the stacking kit.
– Stacking Kit White: Part No. 427976.
Installation requirements
Minimum clearances on all sides of at least 20mm.
z
Stable and level floor (if not stacking on top of a front loading washer).
z
Dryer door can be fully opened.
z
Dryer is installed inside, in a dry place, with no risk of rain or freezing, not in direct
z
sunlight or close to a source of heat.
Dryer is not on top of its power cable.
z
10
INSTALLATION INSTRUCTIONS