Fisher & Paykel DH8060P3 User Manual page 31

To clean the door lint filter:
1
2
Cleaning the condenser filter, foam and evaporator grid
To maintain optimum performance of your dryer the condenser filter, foam and evaporator
grid must be cleaned. The condenser filter and lint filter lights will flash when the condenser
filter requires cleaning, then turn off once you press
CARING FOR YOUR DRYER
Open the dryer door.
Remove the lint filter by pulling it up and out
of the filter slot.
Open it out and wipe the surfaces clean with
your hand.
Close the lint filter and place it back in the
opening. Ensure the filter is fitted correctly
back in place before operating the dryer.
to start your cycle.
Condenser filter
The condenser filter is located below the
door on the left-hand side.
Evaporator grid
The evaporator grid is located behind the
condenser filter.
31