Table of Contents
Advertisement
Quick Links
Installation Instructions
Please read and follow the 'Safety and warnings' and 'Installation instructions' sections carefully before using
your dryer!
Accessories
Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside the drum:
• 1 x Drying rack
• 1 x Drain hose
• 1 x Installation instructions and user guide
Unpacking
To ensure the best performance from your new dryer please follow the instructions below.
Removing the Packaging
1. Remove the outer packaging (including the polystyrene packer and plastic wrapping). All packaging must be
removed prior to use.
2. Tilt the machine backwards and 'walk' it off the base one foot at a time. Not doing so may cause damage to
your floor and dryer.
3. Remove all packaging and accessories from inside the drum.
• Ensure packaging materials are kept out of reach of children.
• Please help protect the environment and dispose of the packaging from around the dryer in an
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Condensing/DH9060C1/User_Guide_DH9060C1/03_Installation_Instructi...
environmentally friendly manner.
Updated: Sun, 08 Nov 2020 04:27:36 GMT
Powered by
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fisher & Paykel DH9060C
Summary of Contents for Fisher & Paykel DH9060C
- Page 1 Installation Instructions Please read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections carefully before using your dryer! Accessories Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside the drum: •...
- Page 2 Location • The dryer must be installed in a well- ventilated, dust-free environment. • The dryer must not be installed on any textured floor coverings (eg carpet, rugs) to ensure that openings at the base of the machine are not obstructed. •...
- Page 3 2. Have a minimum clearance on all sides of at least 20mm. 3. Install the machine on a stable and level floor (if not stacking on top of a front loading washer). • Do not install your dryer in such a way that the dryer door cannot be opened fully. •...
- Page 4 Connecting the drain hose: 1. Remove the black hose from the connection at the back of the dryer (A). 2. Uncoil the drain hose (included with your dryer) and connect it to the black hose (B). 3. Place the other end of the drain hose into a tub or standpipe. If you connect the drain hose onto your dryer, the other end must be secured in a drain to prevent water draining onto the floor.
- Page 5 • Do not touch or operate the machine with wet hands or with bare-feet. • A damaged power cord must be replaced by a Fisher & Paykel trained and supported service technician, its service agent or similarly qualified persons in order to avoid a hazard. The appliance must not be operated until it is repaired, as there is risk of electric shock.
- Page 6 If there are any problems, you must address these before proceeding with normal use. The dryer will automatically turn off at the end of the cycle if there are no problems. Before you start, it is a good idea to go through the following checklist: 1.
- Page 7 Some cycles have a lower maximum capacity (see the ‘Drying cycles’ section). ** The exact height of your dryer is dependent on how far the feet are extended from the base of the machine. Machine Specifications DH9060C Capacity (kg)* Dimensions (mm)
- Page 8 https://producthelp.fisherpaykel.com/au/Dry/Dryers/Condensing/DH9060C1/User_Guide_DH9060C1/03_Installation_Instructi… Updated: Sun, 08 Nov 2020 04:27:36 GMT Powered by...
Need help?
Do you have a question about the DH9060C and is the answer not in the manual?
Questions and answers