Fisher & Paykel DH8060P1 Installation Instructions Manual

Installation instructions
Please read and follow the
your dryer!

Moving your appliance

If the dryer needs to be placed at an angle for moving, only tip towards the right hand side (when viewed from the
front). If the dryer has not been transported as described, leave it standing upright for at least one hour before
turning on.

Accessories

Please check you received the following accessories with your Fisher & Paykel dryer. You will find them inside
the drum:
• 1 x Drying rack
• 1 x Drain hose
• 1 x Installation instructions and user guide

Unpacking

To ensure the best performance from your new dryer please follow the instructions below.
Removing the packaging
1. Remove the outer packaging (including the polystyrene packer and plastic wrapping). All packaging must be
removed prior to use.
2. Tilt the machine backwards and 'walk' it off the base one foot at a time. Not doing so may cause damage to
your floor and dryer.
3. Remove all packaging and accessories from inside the drum and ensure you remove protective covers from
door and console.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH8060P1/User_Guide_DH8060P1/03_Installation_instructions
'Safety and warnings' and 'installation instructions' sections carefully before using
Updated: Sat, 10 Dec 2022 09:57:54 GMT
Powered by
1