Table of Contents
Advertisement
1
3
2
POWER
1
Keylock
2
SmartTouch™
3
control dial
Digital display
4
screen
Progress lights
5
Delay Start
6
Dryness Level
7
Wrinkle Free
8
Signal
9
Lint filter
!0
Condenser filter
Evaporator grid
START/PAUSE
!1
CONTROL PANEL
4
5
6
Press to turn the dryer on/off.
Touch and hold for 3 seconds to disable all buttons on the
display panel, except 'POWER'
button presses.
Rotate to select your desired drying cycle.
The icon illuminates to indicate the selected drying cycle.
z
Shows the following:
How long the drying cycle has to go.
z
Delayed start time of the drying cycle.
z
Notifications if an error is detected or a warning is necessary.
z
The progress lights indicate what part of the cycle the dryer is
currently on ('Dry', 'Cool' or 'End'). All three lights are on at the
beginning of the cycle. The light for the current part of the cycle
flashes, and each one goes out when that part of the cycle is complete.
Touch 'More'
or 'Less'
time for drying cycles.
Allows you to select the level of dryness for your load.
Allows you to select a wrinkle free option for your cycle.
This button has two functions:
Signal On: Alerts you that the dryer has finished.
z
Signal Damp Dry: Alerts you to remove items once your load
z
reaches the damp/dry stage.
The lights will flash when the machine is switched on as a reminder
to clean the lint filter, the condenser filter or the evaporator grid.
See 'Caring for your dryer' for details.
Touch to start or pause the selected drying cycle.
7
8
9
button. This prevents accidental
to increase or decrease the delay start
!0
!1
13
Advertisement
Table of Contents
