Fisher & Paykel DH8060P3 User Manual page 12

Draining
The dryer is equipped with a condenser unit which accumulates water during the
drying cycle. This water is collected in the removable water tank located at the top left of
the dryer. The accumulated water must be emptied after each drying cycle or you can setup
your dryer to drain automatically using the drain hose provided.
We recommend the dryer is set up to drain automatically where possible especially when
drying full loads, this will avoid having to empty the water tank during a drying cycle.
Connecting the drain hose
1
2
3
12
INSTALLATION INSTRUCTIONS
Remove the black hose from the connection
at the back of the dryer.
Uncoil the drain hose (included with your
dryer) and connect it to the black hose.
Place the other end of the drain hose into a
tub or standpipe.