Checking Readiness For Operation - Borger Classic FL Series Operating Manual

Transportation, Storage and Installation
4.5.2

Checking readiness for operation

BA-Classic FL_en-US, 03.05.2018
NOTE!
Integration into the EMERGENCY STOP system
A Börger machine must be integrated in an EMERGENCY STOP
system.
— It is only permissible to do without an emergency stop device
if the emergency stop device would not reduce the stopping
time and if it would not enable the special measures required
to deal with the risk to be taken.
— The normal shutdown equipment must then be labeled
accordingly.
Personnel:
Protective equip-
ment:
Special tool:
— Read and follow the safety instructions detailed in
2.12 "Safety instructions for maintenance and rectifying mal-
functions" on page 30.
— Ensure that the Börger machine is integrated into an emer-
gency stop system, or, if such a system is not mandatory, that
the shutdown device is adequately labeled.
1. If your Börger machine was delivered with special accesso-
ries, then ensure that these accessories are installed cor-
rectly and ready for operation. This especially applies to
devices used for safety and monitoring system functionality.
Adhere to the relevant operating manuals for the accessories.
2. Ensure that you have removed the transport lock from the
breather system on the drive if one was present according
to the operating manual of the drive manufacturer.
www.boerger.de / www.boerger.com
n Mechanics
n Qualified electricians
n Occupational safety clothing, chemical
resistant
n Safety shoes
n Safety gloves, chemical-resistant
n Safety goggles
Tools, general
n
Ä Chapter
81