Quick-Release Cover; Casing - Borger Classic FL Series Operating Manual

3.1.1

Quick-release cover

3.1.2

Casing

38
The Börger MIP principle (Maintenance in Place) starts with the
quick-release cover (1). This cover enables easy access to the
interior of the casing and to all parts subject to wear in the Börger
machine. The pipes on the inlet and outlet can remain connected.
The quick-release cover can be removed after loosening the four
ring nuts (2), (see
on page 123 and
release cover" on page 125).
The Börger machine can be inspected, serviced and repaired
directly at its point of installation.
The supplementary operating manual in the Appendix contains a
description of other cover types, if these types have been supplied.
The EL rotary lobe pump is available in three casing depths. The
performance data of your rotary lobe pump depends on this depth,
among other things:
Depths
Ä Chapter 3.3 "Technical data" on page 49.
Also see
The block-type, one-piece casing is equipped as standard with an
internal casing protection plate towards the gear unit and one
towards the quick-release cover.
The casing is manufactured from high-quality gray cast iron, spher-
oidal cast iron or stainless steel.
The pump chamber can also be completely covered with optional
®
radial MIP casing liners.
www.boerger.de / www.boerger.com
Ä Chapter 6.3.1 "Notes on repair work"
Ä Chapter 6.3.2 "Opening and closing the quick-
BA-Classic FL_en-US, 03.05.2018
Product Description
— FL 518
— FL 776
— FL 1036