Other versions
4.4.3
Installing the inlet and outlet
68
Example: anchor bolts
Series
AL
PL, CL, FL, EL
XL
— Mobile units must be operated on a solid surface and be
secured in place. Double-check this.
— Börger machines that are operated on a vehicle must be
fixed to the vehicle frame. Double-check this.
— When installing special versions, check whether a supple-
mentary operating manual is enclosed in the appendix and, if
so, follow the instructions.
NOTICE!
Risk of damage due to incorrectly installed pipe system!
Börger machines are robust, and are constructed for use with
high loads. However, they must not be used as an anchor point
for the pipe under any circumstances. Even at low vibrations, the
stress generated on the pipe during operation can lead to cracks
on weaker components / weld seams.
— Pipes and any additional components such as valves, check
valves etc. must not subject the machine and flange connec-
tions to stress.
— Avoid misalignment between the machine pipe connectors
and the pipe.
— All attachment parts must be supported as close to the
machine as possible according to the valid general technical
rules.
www.boerger.de / www.boerger.com
Transportation, Storage and Installation
Anchor bolts
M12 x 130 mm (5.1 ")
M16 x 160 mm (6.3 ")
M20 x 160 mm (6.3 ")
BA-Classic FL_en-US, 03.05.2018