Replacing The Gear-Side Casing Protection Plate - Borger Classic FL Series Operating Manual

Maintenance and Repairs
6.3.6

Replacing the gear-side casing protection plate

BA-Classic FL_en-US, 03.05.2018
Fig. 11: Example: casing protection plate, two parts
1 Rotating holding bush O-ring
2 Countersunk screw
3 Gear-side casing protection plate, two parts
4 Jacking thread
Personnel:
Protective equip-
ment:
Special tool:
— Read and follow the safety instructions detailed in
2.12 "Safety instructions for maintenance and rectifying mal-
functions" on page 30.
— Shut down the Börger machine and downstream and upstream
system components as described in
times" on page 93.
— Secure the Börger machine against unauthorized or uncon-
trolled reactivation as described in
machine against restart" on page 24
www.boerger.de / www.boerger.com
n Mechanics
n Occupational safety clothing, chemical
resistant
n Safety shoes
n Safety gloves, chemical-resistant
n Safety goggles
n Tools, general
n W1 - Sealing compound
Ä Chapter 5.3 "Down-
Ä Chapter 2.7 "Securing the
Ä Chapter
163