Table of Contents
Advertisement
2.12
Safety instructions for maintenance and rectifying malfunctions
30
Keep long hair tied and do not wear loose clothing or jewelry.
There is always a danger of getting caught, pulled in or dragged
along by moving components.
If malfunctions occur on the Börger machine:
1.
Shut down the machine and downstream and upstream
machines / system components.
2.
Secure the machine and downstream and upstream
machines / system components against accidental restart.
3.
Report the malfunction to the responsible department/person.
This especially applies to safety-related alterations to the Börger
machine.
Observe the maintenance instructions when carrying out mainte-
nance on the Börger machine.
Work on the Börger machine may only be carried out by trained,
reliable personnel. Personnel in training or requiring instruction, as
well as persons currently in vocational training, may only operate
the Börger machine under the constant supervision of an experi-
enced staff member.
Adhere to the prescribed intervals for regular maintenance and
inspections or those specified in the operating manual.
Aside from the special tools specified in the spare parts list, suit-
able customary workshop equipment is essential for carrying out
maintenance work.
Modifications, repairs, maintenance and troubleshooting may only
be carried out when the Börger machine is switched off. Accidental
restarting of the unit must be prevented completely.
To the extent necessary, amply secure the surrounding area when
performing maintenance. Cordon off the working area with a red
and white safety chain and a warning sign.
Large assemblies and components must be carefully attached and
secured to hoists when they are removed or replaced so that asso-
ciated dangers are minimized. Only appropriate hoists and lifting
media in technically perfect working condition with sufficient load
capacities may be used.
www.boerger.de / www.boerger.com
BA-Classic FL_en-US, 03.05.2018
Safety
Advertisement
Table of Contents
