Electrical, Hydraulic And Pto Shaft Connection - Borger Classic FL Series Operating Manual

Transportation, Storage and Installation
4.4.5

Electrical, hydraulic and PTO shaft connection

EMERGENCY STOP
system
BA-Classic FL_en-US, 03.05.2018
4. Check the screws used to fasten the Börger machine to the
base frame and retighten them, if necessary.
NOTE!
Integration into the EMERGENCY STOP system
A Börger machine must be integrated in an EMERGENCY STOP
system.
— It is only permissible to do without an emergency stop device
if the emergency stop device would not reduce the stopping
time and if it would not enable the special measures required
to deal with the risk to be taken.
— The normal shutdown equipment must then be labeled
accordingly.
The installation of the Börger machine must have been concluded
completely before the electric or hydraulic connections are made
or the PTO shaft is connected.
www.boerger.de / www.boerger.com 73