Residual Risk - Borger Classic FL Series Operating Manual

Safety
2.4

Residual risk

Electric current
BA-Classic FL_en-US, 03.05.2018
Even when all safety instructions are adhered to, there are residual
risks involved in operating the Börger machine as detailed below.
All persons that work on and with the Börger machine must be
aware of these residual risks and observe the associated instruc-
tions to avoid accidents or damage caused by these residual risks.
It may be necessary to remove on-site safety equipment during
installation and when making modifications. This causes a residual
risk and potential danger that each operating person must be
aware of:
DANGER!
Risk of fatal injury due to electric power!
There is an immediate risk of fatal electric shock if live compo-
nents are touched. Damage to the insulation of the individual
components can be fatal.
— Have all work on the electrical equipment performed by skilled
electricians.
— In the event of damage to the insulation, cut off the power
supply immediately and initiate repairs.
— Before working on live components of electrical systems and
equipment, de-energize these components and secure them
in this state for the duration of the work. Adhere to the fol-
lowing safety rules in this regard:
— Disconnect.
— Secure against restart.
— Verify that components have been de-energized.
— Ground and short-circuit.
— Cover or shield any adjacent live components.
— Never bypass or disable any fuses. Comply with the correct
amperage specification when replacing fuses.
— Keep moisture away from all live components. This may lead
to short circuits.
www.boerger.de / www.boerger.com 17