Table of Contents
Advertisement
Maintenance and Repairs
6.3.7
Other repairs
6.3.8
Measures following repair and maintenance work!
BA-Classic FL_en-US, 03.05.2018
If repairs to your Börger machine are required that are not covered
by the described repair and maintenance measures, we recom-
mend contacting Börger customer service.
The factory can only accept repair orders if a completed safety cer-
tificate / declaration of decontamination accompany the device
submitted for repair, as well as any necessary safety data sheets
for the medium and / or cleaning agent.
The relevant form is also available as a download from our website
under the service menu.
Following completion of the work and before starting the unit, carry
out the following steps:
Personnel:
Protective equipment:
Special tool:
— Read and follow the safety instructions detailed in
2.12 "Safety instructions for maintenance and rectifying mal-
functions" on page 30.
1.
Check all screws that have been loosened previously for firm
seat.
2.
Check whether all safety devices and covers that have been
removed previously are reinstalled properly.
3.
Ensure that all tools, materials and other equipment used has
been removed from the work area.
4.
Clean the work area and remove any spilled substances, e.g.
liquids, processing material or similar.
5.
Reset the emergency stop devices, if required.
6.
Confirm malfunctions at the control unit.
7.
Ensure that nobody enters the hazardous area.
8.
Ensure that all safety features of the unit function perfectly.
www.boerger.de / www.boerger.com
n
Mechanics
Occupational safety clothing, chemical
n
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
n
Tools, general
Ä Chapter
165
Advertisement
Table of Contents
