Table of Contents
Advertisement
9
Appendix
9.1
Data sheet
9.2
Wear parts
172
The data sheet is enclosed separately with the operating manual.
The data sheet contains all relevant data for your Börger machine.
Especially consider the operating conditions and limits mentioned
in the data sheet. They may deviate from the information men-
tioned in this operating manual if the machine has special equip-
ment.
WARNING!
Risk of injury when using unsuitable spare parts!
The use of unsuitable spare parts can cause malfunctions which
can lead to severe injury, including death, and to significant mate-
rial damage.
— Only use suitable spare parts.
— Always contact the manufacturer if in doubt.
The following wear parts list includes the quantity, designation and
position number of the elements that are replaced during the corre-
sponding repair work. Also observe the assembly drawing
according to
the spare parts list according to
on page 172.
Machine type, version and the corresponding materials are indi-
cated by the type code on the Börger machine or unit nameplate.
The required number of individual parts will to some extent depend
on your Börger machine. Take note of the number of parts
removed during repair work, cf. also figures in the repair chapters.
Please contact Börger customer service if you have any questions
on this matter.
www.boerger.de / www.boerger.com
Ä Chapter 9.3 "Assembly drawing" on page 175 and
Ä Chapter 9.2 "Wear parts"
BA-Classic FL_en-US, 03.05.2018
Appendix
Advertisement
Table of Contents
