Checking Smooth Running Following Storage And Long Downtimes - Borger Classic FL Series Operating Manual

4.5.1

Checking smooth running following storage and long downtimes

80
Personnel:
Protective equipment:
Special tool:
— Read and follow the safety instructions detailed in
2.12 "Safety instructions for maintenance and rectifying mal-
functions" on page 30.
— To the extent necessary, amply secure the surrounding area
when performing maintenance. Cordon off the working area
with a red and white safety chain and a warning sign.
1. Following long storage periods and downtimes, check
that the mechanical seals (or any special seals) and the
rotating parts run smoothly before commissioning the
Börger machine again:
Open the quick-release cover, see
and closing the quick-release cover" on page 125, and attach
a hexagon socket wrench or ratchet to one of the hexagon
socket head cap screws that fasten the rotating parts to the
shafts. Use the tool to rotate the shaft clockwise. The shafts
and the rotating parts must not become jammed.
2. On used machines, remove any foreign bodies that may
cause the rotating parts to jam. If this does not solve the
problem, then removal and possibly replacement of the
mechanical seals or rotating parts is necessary.
3. Install the quick-release cover in accordance with
6.3.2 "Opening and closing the quick-release cover"
on page 125.
www.boerger.de / www.boerger.com
Transportation, Storage and Installation
n Mechanics
n Occupational safety clothing, chemical
resistant
n Safety shoes
n Safety gloves, chemical-resistant
n Safety goggles
n Tools, general
Ä Chapter 6.3.2 "Opening
BA-Classic FL_en-US, 03.05.2018
Ä Chapter
Ä Chapter