Cleaning The Inside - Borger Classic FL Series Operating Manual

Maintenance and Repairs
6.1.3

Cleaning the inside

BA-Classic FL_en-US, 03.05.2018
WARNING!
Risk of serious injuries caused by liquid spouting out or
escaping gases!
Gases or liquids may escape uncontrollably from seals and screw
connections. Especially when flange connections are released
and maintenance openings are opened, pressurized liquid can
spout out at the cover.
Never loosen connections when the unit is pressurized.
— Ensure that all valves and shut-off devices on the inlet and
outlet are closed.
— Depressurize and empty the Börger machine through a
drainage device, if available.
— Immediately absorb escaping media using suitable agents
and dispose of it in accordance with the applicable local regu-
lations.
— Therefore, wear your personal protective equipment (PPE) as
Ä Chapter 2.6 "Personal protective equipment"
described in
on page 23 when opening the cover and take all necessary
precautions.
WARNING!
Severe injury due to residual pressure!
Despite having depressurized the Börger machine, it may be
under residual pressure in the event of congestion or lump forma-
tion in the medium.
— Take extra care when removing the flange connections and
maintenance openings to prevent accidents caused by the
release of residual pressure.
www.boerger.de / www.boerger.com 111