Table of Contents
Advertisement
6.2
Maintenance and inspection
6.2.1
Maintenance and inspection plan
Interval
Maintenance work
when necessary Checking the outer surfaces for dust deposits and dirt
— If necessary, clean the outer surfaces as described in
daily
Audible check for smooth running
— In the event of a malfunction: suitable measures as
Visual check for leaks (including overflow check at the
ventilation opening of the intermediate chamber)
— Replace the seals, if necessary, as described in
— Correct the fill level of the intermediate chamber if a
114
NOTICE!
Risk of material damage due to improper maintenance!
— Also observe the maintenance intervals detailed in the oper-
ating manuals for the drive gear unit, motor etc., which are
included in the appendix.
— Prepare a maintenance schedule adapted to the operating
conditions.
NOTE!
Maintenance intervals
The following intervals are guidelines. These intervals can be sig-
nificantly reduced depending on the operating conditions.
Ä Chapter 6.1 "Machine care" on page 106
Ä Chapter 5.5 "Malfunctions"
described in
on page 95
Ä Chapter 6.3.4 "Replacing the mechanical seal"
on page 149
seal leakage can be excluded, see
"Lubricant fill level and changing the lubricants"
on page 116
www.boerger.de / www.boerger.com
Maintenance and Repairs
Personnel
Operating person
Operating person
Operating person
Ä Chapter 6.2.2
BA-Classic FL_en-US, 03.05.2018
Advertisement
Table of Contents
