Table of Contents
Advertisement
Unpacking
To ensure the best performance from your new washer please follow the instructions below.
Removing the Packaging
1. Remove the outer packaging.
2. Tilt the washer backwards and walk it off the
base packer one foot at a time (ensure the lid is
still taped down).
3. Remove the base packer from under the
washer by tilting the washer backwards and
pulling the packer out the front.
4. Remove the tape, lift the lid and remove the
bowl packer from the bowl.
5. Remove the hoses and accessories.
6. Keep the base packer and bowl packer in case
they are required for future transit.
Please ensure that the base packer has been removed BEFORE OPERATING your washer.
Location
Install the washer on a solid and level floor surface ensuring it has at least 20mm clearance on each
side. The washer must not be installed on any textured floor coverings (eg carpets, rugs).
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA70T60GW1/User_Guide_WA70T60GW1/03_Inst...
Tilt washer backwards to remove packer
Updated: Wed, 20 Jan 2021 23:10:07 GMT
Powered by
3
Advertisement
Table of Contents
