Seat Plate With Seat Cushion (Option); 620 Mm Back Height With Deep Backrest Bracket (Option) - Otto Bock Discovery Instructions For Use Manual

63

7.12 Seat plate with seat cushion (option)

WARNING
Improper handling of ignition sources
Risk of severe burns due to seat cushions, padding and upholstery catching on fire
► The seat cushions, padding and covers fulfil the normative requirements for flame resistance. However, they
may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes and open flames.
The seat plate is mounted on the mobility base for seating shells by qualified personnel according to the needs of
the user. Users or attendants are not supposed to remove or install the seat plate.
The seat cushion can be removed for cleaning.
Removing and fastening the seat cushion
1) Carefully pull the seat cushion off the hook-and-loop fastener on the seat plate (see fig. 64).
2) After cleaning (see Page 49): Place the seat cushion on the seat plate. Secure the seat cushion against sliding
by pressing it onto the hook-and-loop fastener (see fig. 64, item 1).
64
7.13 620 mm back height with deep backrest bracket (option)
The extended back tubes make it possible to attach all of the back straps across the entire surface of the back pad­
ding directly to the back tubes (see fig. 65, item 1). The deep backrest bracket allows very flexible adjustment of
the back straps (see fig. 65, item 2).
Due to the extended back tubes, it is not possible to adjust the height of the push handles / push bar.
Discovery
60°
Use
39