Otto Bock 4R72-32 Instructions For Use Manual page 9

Replacement and disassembly
The set position of the prosthetic component can be maintained dur­
ing replacement or disassembly. In order to do this, unscrew the two
set screws that are screwed in the furthest and located next to each
other.
6 Cleaning
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
► The prosthetic components should be inspected after the first 30
days of use.
► Inspect the entire prosthesis for wear during normal consulta­
tions.
► Conduct annual safety inspections.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.
9 Legal information
All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on
medical devices. The CE declaration of conformity can be down­
loaded from the manufacturer's website.
9.3 Warranty
The manufacturer warrants this device from the date of purchase. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.
10 Technical data
Reference number
Weight [g]
System height [mm]
Material
Max. body weight [kg]
1 Description du produit
INFORMATION
Date de la dernière mise à jour : 2020-04-07
► Veuillez lire attentivement l'intégralité de ce document avant
d'utiliser le produit ainsi que respecter les consignes de sécuri­
té.
► Apprenez à l'utilisateur comment utiliser son produit en toute sé­
curité.
► Adressez-vous au fabricant si vous avez des questions concer­
nant le produit ou en cas de problèmes.
4R72­ 4R72­ 4R72­ 4R72­
=32 =45 =60
85 95 110
69 82 97
Titanium
150
Français
=75
125
112
9