Chapter 9 Troubleshooting - LS ELECTRIC XGT Series User Manual

Chapter 9 Troubleshooting

Chapter 9 Troubleshooting
An explanation of how to check the causes of a failure or an error that may occur during system operation and measures.
The following procedure can be used to check the status of the Ethernet module. Please follow the troubleshooting
procedures to determine the abnormal module status.
(1) Error checking method by LED on the front of module
Check whether there is a problem with the Ethernet module by lighting the LED on the front of the Ethernet module.
(2) Error checking method by XG5000 connection(Only Ethernet module)
1) Error / Warning check during PLC operation
2) Error / Warning check during communication module operation.
- Error / Warning check during communication module operation(P2P/dedicated service)
- Error / Warning check during communication module operation(Smart Extension Service)
- Diagnostic variables during communication module operation(Smart Extension Service)
3) View Communication Module Log
(3) XGT dedicated communication error code(Only Ethernet module)
9-1