Table of Contents
Advertisement
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Windrow Merger has been completely set-up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as you have
made the proper adjustments and found the item operating satisfactorily.
'
All shields and guards are in place and fastened
'
All grease fittings have been lubricated - (See lubrication guide in this manual).
'
All mechanisms are operating trouble free.
'
Belts and drive chains properly adjusted.
'
All bolts and fasteners are tight.
'
All decals are in place and legible.
'
All hydraulic hoses & fittings securely tightened.
(Signature of Pre-Delivery Inspector)
T his check list that follows is an important reminder of valuable information that should be passed on to the
customer at the time this Windrow Merger is delivered.
Check off each item as you explain it to the customer.
This delivery check list, when properly filled out and signed assures the customer that the Pre-delivery
service was satisfactorily performed.
'
Explain to the customer that the pre-delivery inspection was made.
'
Explain to the customer all the safety precautions they must excercise when operating this unit.
'
Explain to customer that regular lubrication is required for proper operation and long life of
machine. Show customer the lubrication section of Owner's Manual.
'
Give the customer Owner's Manual and make sure they read and understand all operating and
service instructions.
'
Record Serial Number on page 21 of this Manual.
'
Have customer sign a completed "Warranty Registration," and mail it promptly.
Date Delivered
Note: Warranty is not valid until warranty card is completed and returned to H & S Mfg. Co., Inc.
H&S
DEALER PRE-DELIVERY CHECK LIST
(Dealer's Name)
DEALER DELIVERY CHECK LIST
-3-
Model Number
Serial Number
(Inspection Date)
Dealer's Name
By
Signature of Original Buyer
Advertisement
Table of Contents
