Table of Contents
Advertisement
4.
Slide pump on receiver and secure with pin (E) provided and install safety-locking device.
5.
Slide spring loaded locking collar (F) on PTO yoke rearward, and slide yoke onto the tractor PTO shaft.
Release spring loaded collar. Be sure the pins fall into the grove of the tractor PTO shaft and collar
snaps forward into position. CAUTION: Do not use steel hammer to aid in joining PTO parts.
6.
Remove weight from lift jack and place in storage position (G).
7.
Connect four hydraulic hoses to the tractor (9' pickups). Two hoses open and close the machine and the
other two supply oil to the electric/hydraulic solenoid valve for pickup heads.
8.
Connect six hydraulic hoses to the tractor (12' pickups). Two hoses open and close the machine, two
hoses raise and lower the left hand head and two hoses raise and lower the right hand head.
PRE-OPERATION
F
-11-
(Continued)
E
G
Advertisement
Table of Contents
