Pc Health Status - JETWAY 613CN User Manual

Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the
boot and Plug and Play compatible devices. However, this capability means absolutely
nothing unless you are using a Plug and Play operating system such as
Windows  95/98. If you set this field to "manual" choose specific resources by going
into each of the sub menu that follows this field (a sub menu is preceded by a ">").
The settings are: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status.
This is only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Show PC Health in Post
CPU Warning Temperatyre
Warning_Beep
Shutdown Temperature
Current System Temp.
Current CPU Temperature
Current FAN1
Current FAN2
Current FAN3
Vcore
Vtt(V)
Vcc3.3
+5V
+12V
-12V
-5V
VBAT(V)
5VSB(V)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or
PC Health Status
Enabled
Disabled
Enabled
Disabled
25 。 C/77 。 F
49 。 C/120 。 F
Speed. 4172 RPM
Speed. 4358 RPM
Speed. 4041 RPM
2.0 V
1.55 V
3.36 V
4.94 V
11.97 V
-12.11 V
- 4.94 V
3.31 V
5.34 V
F6:Optimized Defaults F7:Standard Defaults
Menu Level >
39
Item Help
F1:General Help