Pnp/Pci Configuration Setup - JETWAY 613CN User Manual

Secondary IDE 0
Secondary IDE 1
FDD,COM,LPT Port
PCI PIRQ[A-D]#
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Reload Timer Events
Reload Global Timer events are I/O events whose occurrence can prevent the system
from entering a power saving mode or can awaken the system from such a mode. In
effect, the system remains alert for anything that occurs to a device which is
configured as Enabled, even when the system is in a power down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D] #

3-9 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or Personal Computer
I
nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed the
CPU itself uses when communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only experienced users should
make any changes to the default settings.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Disabled
Disabled
Disabled
Disabled
F6:Optimized Defaults F7:Standard Defaults
PnP/PCI Configurations
Disabled
Manual
Press Enter
Disabled
F6:Optimized Defaults F7:Standard Defaults
38
Menu Level >>
F1:General Help
Item Help
Menu Level >
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
F1:General Help