Advanced Chipset Features - JETWAY 613CN User Manual

Sets the number of times a second to repeat a keystroke when you hold the key down.
The settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before is begins to repeat the keystroke.
The settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the
OS Select For DRAM > 64MB
Allows OS2  to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and
OS2. Set to OS/2 if using more than 64MB and running OS/2  .
Report No FDD For Win 95
Whether report no FDD for Win 95 or not. The settings are: Yes, No.

3-6 Advanced Chipset Features

The Advanced Chipset Features Setup option is used to change the values of the
chipset registers. These registers control most of the system options in the computer.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
SDRAM CAS Latency Time
SDRAM Cycle Time Tras/Trc
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
Special Buffer Strength
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole at 15M-16M
CPU Latency Timer
Delayed Transaction
On-Chip Video Window Size
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Note: Change these settings only if you are familiar with the chipset.
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
correct password is not entered prompt.
Advanced Chipset Features
3
6/8
3
3
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
64MB
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
30
Item Help
F1:General Help