Starting Up Your Computer - JETWAY 613CN User Manual

2-7 Starting Up Your Computer

1. After all connections are made, close your computer case cover.
2. Be sure all the switch are off, and check that the power supply input voltage is set
to proper position, usually in-put voltage is 220V240V or 110V120V depending
on your country's voltage used.
3. Connect the power supply cord into the power supply located on the back of your
system case according to your system user's manual.
4. Turn on your peripheral as following order:
a. Your monitor.
b. Other external peripheral (Printer, Scanner, External Modem etc...)
c. Your system power. For ATX power supplies, you need to turn on the power
supply and press the ATX power switch on the front side of the case.
5. The power LED on the front panel of the system case will light. The LED on the
monitor may light up or switch between orange and green after the system is on. If
it complies with green standards or if it is has a power standby feature. The system
will then run power-on test. While the tests are running, the BIOS will alarm
beeps or additional message will appear on the screen.
22