Pc Health Status; Frequency/Voltage Control - JETWAY For Socket 370 User Manual

F5:Previous Values

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
CPU Warning Temperature
Shutdown Temperature
Show PC Health in Post
Current System Temp.
Current CPU Temperature
Current CPUFAN Speed
Current SYSFAN Speed
Vcore
Vcc3.3
+ 5V
+12V
-12V
5VSB(V)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current CPUFAN, SYSFAN Speed/
Vcore/ Vcc/3.3V/+5V/+12V/-12V/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Frequency/Voltage Control

This section is for setting CPU Frequency Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Cyrix III Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/DRAM Clock
CPU Clock Ratio Jumpless
F6:Optimized Defaults F7:Standard Defaults
PC Health Status
Disabled
Disabled
Enabled
28  C/82  F
29  C/84  F
4687 RPM
0 RPM
1.69V
3.31V
5.00V
+ 12.02V
- 12.16V
5.45V
F6:Optimized Defaults F7:Standard Defaults
Frequency/Voltage Control
Default
Enabled
Disabled
Default
x 3.0
40
Item Help
Menu Level >
F1:General Help
Item Help
Menu Level >
CyrixIII CPU Ratio
Adjust