Headers - JETWAY 613CN User Manual

This connector connects to the next set of Master and Slave hard disks. Follow
the same procedure described for the primary IDE connector. You may also
configure two hard disks to be both Masters using one ribbon cable on the
primary IDE connector and another ribbon cable on the secondary IDE
connector.

Two hard disks can be connected to each connector. The first HDD is referred to
as the "Master" and the second HDD is referred to as the "Slave".

For performance issues, we strongly suggest you don't install a CD-ROM or
DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system
performance on this channel may drop.

2-6-2 Headers

(1) COM2 Headers (9-pin header) : COM2
This board has another serial port COM2, it come with cable providing serial
port COM2.
(2) Audio Port Headers (9-pin) : AUDIO
(3) IDE Activity LED: HDDLED
This connector connects to the hard disk activity indicator light on the case.
19