Table of Contents
Advertisement
PCI slot2
PCI slot3
Onboard LAN
Onboard VGA
AC97/MC97
Onboard USB
IMPORTANT! If using PCI cards on shared slots, make sure that the drivers
2-6 Connectors, Headers
2-6-1 Connectors
(1)
Power Connector (20-pin block) : ATX-POWER
ATX Power Supply connector. This is a new defined 20-pins connector that
usually comes with ATX case. The ATX Power Supply allows to use soft power
on momentary switch that connect from the front panel switch to 2-pins Power
On jumper pole on the motherboard. When the power switch on the back of the
ATX power supply turned on, the full power will not come into the system board
until the front panel switch is momentarily pressed. Press this switch again will
turn off the power to the system board.
(2)
PS/2 Mouse & PS/2 Keyboard Connector: KB&MS
If you are using a PS/2 mouse, you must purchase an optional PS/2 mouse set
which connects to the 5-pins block and mounts to an open slot on your
computer's case.
support "Shared IRQ" or that the cards don't need IRQ assignments.
Conflicts will arise between the two PCI groups that will make the
system unstable or cards inoperable.
Not Shared
Shared
Shared
15
Shared
Shared
Advertisement
Table of Contents
