Pnp/Pci Configuration Setup; Irq Resources - JETWAY 916PCP User Manual

3-9 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
Auto Detect PCI Clock
Spread Spectrum
Flash Port Write Protect
> IRQ Resources
PCI/VGA Palette Snoop
*** PCIExpress Relative Items ***
Maximum Payload Size
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.

IRQ Resources

When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
Please refer to section 3-9-1
3-9-1 IRQ Resources
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
3-10 PC Health Status
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Enabled
Disabled
Enabled
Press Enter
Disabled
4096
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
41
Item Help
F1:General Help
Item Help
F1:General Help