Renesas RZ/T2M User Manual page 68

Renesas Starter Kit+ for RZ/T2M
Table 6-78, Table 6-79, Table 6-80, Table 6-81, Table 6-82 below details the function of the switches
associated with the mikroBUS™.
SW6-1
ON
OFF
SW5-10 SW5-9
ON OFF OFF
OFF ON OFF
OFF OFF ON
SW5-7 SW5-6
ON OFF OFF
OFF ON OFF
OFF OFF ON
SW6-8 SW6-7
ON OFF
OFF ON
Table 6-82: mikroBUS™ BUS Configuration Switch Settings (5)
SW6-6 SW6-5
ON OFF
OFF ON
R20UT4939EG0100 Rev. 1.00
Apr 20, 2022
Table 6-78: mikroBUS™ Configuration Switch Settings (1)
Enable the external bus signal.
Enables signals other than the external bus. (CAN, Emulator, I
Table 6-79: mikroBUS™ Configuration Switch Settings (2)
SW5-8
Enable the "M1_UP" signal.
Enable the "SCK3" signal.
Enable the " MIK_PWM" signal.
Table 6-80: mikroBUS™ Configuration Switch Settings (3)
SW5-5
Enable the "M1_VP" signal.
Enable the "RS485_RXD" signal.
Enable the "SCI_RXD" signal.
Table 6-81: mikroBUS™ Configuration Switch Settings (4)
Enable the "MB_RST#" signal.
Enable the "M1_WN" signal.
Enable the "SCI_TXD" signal.
Enable the "M1_VN" signal.
Explanation
C, etc.)
2
Explanation
Explanation
Explanation
Explanation
6. Configuration
Page 68 of 87