Programming Segment - MICRO-EPSILON DD214NA Instruction Manual

Programming
If the correct code is not known:
Return the counter to the factory.
When the correct code has been input, press the
The programming segments are now called up in succession.
5.2

Programming Segment

The programming segment begins with programming line 20. Programming lines are displayed in sequence in
all these segments.
Programming lines are displayed in succession. The input is stored when the next line is called up.
The operating parameters are selected consecutively.
Enter changed value with the keys
Reset the parameters with the
Programming
Press the key.
The system transfers from the operating to the programming mode.
is displayed.
Change to Chap. 5.1, if code has been programmed.
Press the key.
is displayed.
Press the key.
X9751171-A010047MSC
key.
and .
key.
MICRO-EPSILON
Correct code
unknown
Correct code
Default settings are
always printed with *
.
Changing operating
parameters
Page 19