Channel Strip; Select Button Modifiers - PRESONUS FaderPort 16 Owner's Manual

2 Studio One
2.2

Channel Strip

2.2 Channel Strip
kick
1
R80
2.2.1

Select Button Modifiers

1. Channel Name. Displays the Channel name.
1
2. Metering. Displays the channel metering. This can be turned on or off by
2
3 pressing SHIFT plus the push button encoder in the Session Navigator.
4
3. Value. Displays the Channel's current pan position value. While the
fader is being adjusted, this value will display the current fader level.
5
4. Pan Display. Displays the Channel's current pan position.
5. Pan/Param. Controls panning for the currently selected
channel. Push to set the pan position back to center.
6
6. Select Button. This button selects the corresponding
channel in Studio One and changes color to match the
7
channel color codes you have chosen in your session. See
Section 2.2.1 for alternate functions and modes.
8
7. Solo. Isolates the corresponding channel's output signal
in the mix. Press and hold to solo momentarily.
8. Mute. Mutes the corresponding channel's output
signal. Press and hold to mute momentarily.
9. Touch-Sensitive Fader. This 100 mm motorized fader can be used to
control volume levels, aux send levels, panning, or plug-in parameters,
depending on mode. See Section 2.6 for more information.
9
Arm. Pressing the Arm button will allow you to arm track for recording by pressing
the corresponding track's Select button.
Arm All. Press Shift + Arm to arm all tracks for recording.
Macro. Press to display the Channel Editor macro controls for the Selected channel
on your FaderPort (Studio One Pro only).
Link. When Link is enabled, the Pan / Param encoder will control any parameter
beneath your mouse. To lock a parameter to this encoder, press SHIFT + Link.
FaderPort™ 16
Owner's Manual
7