PRESONUS Quantum Series Owner's Manual page 54

Ultra-low latency thunderbolt audiointerfacesand studio command centers

Hide thumbs Also See for Quantum Series:

Table of Contents

Studio One Artist Quick Start

6.5

Monitor Mixing in Studio One

2. On the Console preference tab, check the box next to"Audio track

monitoring mutes playback (TapeStyle).This will allow youuse Cue

Mix to monitor during a punch in. Click Apply and then OK.

在 Console preference（控制台偏好）选项卡上，选中 "Audio track monitoring mutes

playback (Tape Style) "旁边的方框。这将允许你在 Punch in 期间，可以使用Cue Mix来监

听。点击Apply应用，然后确定。

3. After you have recorded your audio, set the punch in and out points in the timeline.

在你录制完音频后，在时间轴上设置"punch in and out" 开始/停止录音.

4. Enable the Autopunch button the left of the Metronome settings in the transport.

启用传输工具中，启动节拍器设置左侧的"Autopunch" 按钮。

5. Record Arm your track, making sure to disable input monitoring.

录制Arm你的轨道，确保禁用输入监听。

You're now ready to punch in. Simply rewind to the point in

the song at which you'd like to start and click record.

现在你已经准备 punch in。仅需倒退到你想开始歌曲中的

位置，然后点击录音。

Quantum-series

Owner'sManual

Table of Contents