Integrated Quantum Controls 集成Quantum控制; 6.4.1 Preamp Controls 前置放大器控制 - PRESONUS Quantum Series Owner's Manual

6 Studio One Artist Quick Start
6.4 Integrated Quantum Controls
6.4 Integrated Quantum Controls 集成的Quantum控制
6.4.1 Preamp Controls 前置放大器控制
You can control the hardware functions of your
Quantum interface from within Studio One.
你可以在Studio One中，控制你的Quantum接口
硬件功能。
As soon as you set an analog Quantum input as the input source for a
track in Studio One, you'll find its preamp controls in the Studio One
mixer. If a DigiMax DP88 is connected to the ADAT inputs on your
Quantum, you'll find these controls available for those inputs as well.
只要你在Studio One中，把模拟Quantum输入设置为一个音轨的输
入源，你就会在Studio One混音器中发现它的前置放大器控制。
如果DigiMax DP88连接到Quantum的ADAT输入，你会发现这些控
制也可以用于这些输入。
You can choose to hide the preamp controls for your Quantum interface from the
Console Options menu. Simply uncheck the box next to "Show audio device controls."
你可以在"Console Options"选项菜单中，选择隐藏你的Quantum接口的前置放大
器控制。只需取消勾选 "Show audio device controls "旁边的方框。
Note:BecausepreampcontrolfortheDigiMaxDP88isbidirectional,boththeADATinput
and the ADAT output must be connected in order for Studio One to display its preamp
controls.
注意：由于 DigiMax DP88 的前置放大器控制是双向的，必须同时连接 ADAT 输入
和 ADAT 输出，以便 Studio One 显示其前置放大器控制。
Quantum-series
Owner's Manual
38