Controlling Quantum Mic Preamps With Midi - PRESONUS Quantum Series Owner's Manual

3 Connecting to a Computer
3.3

Controlling Quantum Mic Preamps with MIDI

Controlling Quantum Mic Preamps with MIDI 用MIDI控制Quantum麦克风前置放大器
3.3
Quantum microphone preamps can be controlled from the front panel, UC
Surface, or Studio One. If you configure your Quantum interface as a MIDI device
inside your DAW application, you can also control trim and phantom power from
within your DAW environment and store those settings with your session.
Quantum麦克风前置放大器可以通过前面板、UC Surface或Studio One进行控
制。如果你把Quantum接口配置成DAW应用程序中的MIDI设备，你也可以从
DAW环境中，控制微调和幻象电源，并将这些设置与你的会话一起存储。
Below is a chart explaining the MIDI controls for your Quantum preamps:
下面是一张图表，解释了Quantum前置放大器的MIDI控制：
Preamp MIDI Channel
Preamp 1 Channel 1
Preamp 2 Channel 2
Preamp 3 Channel 3
Preamp 4 Channel 4
Preamp 5 (Quantum) Channel 5
Preamp 6 (Quantum) Channel 6
Preamp 7 (Quantum) Channel 7
Preamp 8 (Quantum) Channel 8
Trim Level Phantom Power ON /OFF
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
CC #7 CC#14(0to63=On, 64to127=Off)
Quantum-series
Owner'sManual
18