Table of Contents
Advertisement
6
Studio One Artist Quick Start
6.3
Creating a New Song
Setting up an external MIDI sound module from the Start page.
从 "Start" 页设置一个外部 MIDI 声音模块。
6. In the Receive From drop-down menu, select the MIDI interface
input from which Studio One Artist will receive MIDI data (that
is, the MIDI port to which your keyboard is connected).
在 Receive From（接收自）下拉菜单中，选择 Studio One
Artist 接收 MIDI 数据的MIDI接口输入（也就是你键盘所连接
的 MIDI 端口）。
Power User Tip: In the Send Todrop-down menu,select the MIDI interface output
from which your Studio One Artist will send MIDI data to your keyboard. If your
keyboard controller doesn't need to receive MIDI data from Studio One, you can
leave thisunselected.
用户提示：在 " Send To" 下拉菜单中，选择 MIDI 接口输出， Studio One
Artist 将从该接口向你的键盘发送 MIDI 数据。如果你的键盘控制器不需要
从 Studio One 接收 MIDI 数据，你可以不选择此项。
7. If this is the only keyboard that you will use to control your external
synthesizers and virtual instruments, you should check the box
next to Default Instrument Input. This will automatically assign your
keyboard to control all MIDI devices in Studio One Artist.
如果这是你用来控制外部合成器和虚拟乐器的唯一键盘，你应
该勾选" Default Instrument Inpu" 方框。这将自动分配你的键
盘来控制Studio One Artist中的所有MIDI设备。
8. Click OK.
点击 "OK"。
If you have a sound module that you'd like to connect, leave the
External Devices window open and proceed to the next part of this
section. If not, you can close the window and skip to Section 6.3.
如果你有一个你想连接的声音模块，让"External Devices" 外部
设备窗口打开，继续本节的下一部分。如果没有，你可以关闭
该窗口， 跳到第 6.3 节 。
MIDI instrument controllers (keyboards, MIDI guitars, etc.) send
musical information in the form of MIDI data to tone modules and
virtual instruments, which respond by generating sound, as
instructed. Tone modules can be standalone sound devices or can
be integrated into a MIDI instrument, such as a keyboard
synthesizer. Studio One Artist refers to all tone generators as
Instruments. Once you have set up your MIDI keyboard controller,
take a moment to configure your sound module.
MIDI乐器控制器（键盘、MIDI吉他等）以MIDI数据的形式向音
色模块和虚拟乐器发送音乐信息，它们按照指示通过产生声音
作出反应。音色模块可以是独立的声音设备，也可以集成到一
个MIDI乐器中，如键盘合成器。Studio One Artist 把所有的音色
发生器都称为乐器。一旦你设置好了你的MIDI键盘控制器，要
花点时间来配置你的声音模块。
Make sure you have connected the MIDI In of your external
sound module to the MIDI Out of your MIDI interface.
确保你已经把你的外部声音模块的MIDI输入连接到你的
MIDI接口的MIDI输出。
Quantum-series
Owner'sManual
29
Advertisement
Table of Contents
