Table of Contents
Advertisement
4
UC Surface Control Software
4.3
Main Knob Controls
4.3
Main Knob Controls
MainOutputControls 主输出控制
4.4
4.5
Talkback (Quantum) 对讲系统 (Quantum)
The large Main level encoder can be used to control any or every output
on your Quantum-series interface. Use these controls to select which
output levels are adjusted with this knob. It should be noted that this knob
always controls the Main Left/Right outputs on Quantum and Outputs
1/2 on Quantum 2. Other analog outputs pairs can be added.
large Main level电平编码器可以用来控制Quantum 系列接口上的任何或
每一个输出。这个旋钮是用来调整输出电平的控制选择。应该注意的是，
这个 旋钮总是控制 Quantum上的主左/右输出和 Quantum 2上的输出。
1/2在 Quantum 2上。其他的模拟输出对可以被添加。
Power User Tip: The volume of any output pair will jump to 0 dB when it is unassigned
from the Main Knob. Because of this, make sure to manage your output volume in your
DAW before disengaging this option.
用户提示：当任何输出对从主旋钮上取消指定时，其音量将跳到
于这个原因，在取消这个选项之前，请确保在
These controls mimic the front panel options on the Quantum, allowing you to remote control
the Main Output Mute, Dim and Mono options. These control are not available for Quantum 2.
这些控制措施模仿了Quantum上的前面板选项，你可以远程控制 主输出静音、调光和
单声道选项。这些控制并不适用于Quantum 2。
From here, you can also choose to have your S/PDIF outputs mirror the Main outputs.
在这里，你也可以选择让你的S/PDIF 输出与主输出相匹配。
The Talkback feature lets you communicate with the performers. Talkback
routing is handled directly to your DAW, simply create a track and assign
its input to the Talkback and route the track to the desired outputs.
对讲功能可以让你与表演者交流。对讲机的路由直接处理到你的DAW，
只需创建一个轨道并将其输入分配给对讲机，然后将轨道路由到所需的输出。
Quantum-series
Owner's Manual
0 dB
DAW
中管理好你的输出音量。
。由
23
Advertisement
Table of Contents
