ETC QuickTouch Preset User Manual page 10

ETC User Guide
QuickTouch Preset
Copy Presets
You can copy any existing preset into a new or existing preset.
Copy to a New Preset
1. Select the desired preset from the Presets screen.
2. Press Copy to open the Copy Preset dialog.
3. Press the Number field and use the Edit Preset Number dialog if you want to change the preset
number.
4. Press the Name field and use the Preset Name dialog that appears to change the preset name.
5. Press Create.
Note:
panel preset. Conversely, when you copy a system preset, the new preset is not
designated as a system preset.
Copy to an Existing Preset
CAUTION:
in the existing preset entirely. A confirmation dialog will open if you attempt to
overwrite an existing preset.
Overwriting an existing preset that is referenced in the cue stack may severely
modify the look of your show. If you do so, it is important to double check and
most likely re-program the cue stack.
You are about to delete preset content that cannot be recovered.
1. Select the desired preset from the Presets screen.
2. Press Copy to open the Copy Preset dialog.
3. Press the Number field and use the Edit Preset Number dialog if you want to change the preset
number.
4. Press the Name field and use the Preset Name dialog that appears to change the preset name.
5. Press Create. From the Copy Preset # dialog that appears, select Yes or No.
Yes overwrites the preset with the copied content.
•
No returns you to the Copy Preset dialog.
•
QuickTouch Preset
When you copy a panel preset, the newly created preset is also designated as a
Copying a preset into an existing preset will overwrite any content
Page 10 of 15 ETC