Switching The Top Burner On And Off; Switching The Oven On And Off - Angelo Po 1N1FAG User Manual

Lighting
Turn on the gas supply tap.
1)
Press the knob
2)
(pos. ) to light the pilot light.
1
Hold the knob down for approximately 15 sec.
3)
to start up the thermocouple.
Turn the knob (A) anti-clockwise (pos.
4)
light the burner.
Press the knob
5)
clockwise to adjust the power of the fl ame
down to the minimum setting.
Turning off
Turn the knob (A) clockwise (pos. 1) to turn the
1)
burner off . The pilot light will remain on to allow
the burner to be re-lit.
Press the knob
2)
to turn off the pilot light.
Turn off the gas supply tap to ensure safety.
3)
Lighting
Important
At fi rst switch-on, preheat as appropriate.
Turn on the gas supply tap.
1)
Press the knob (A) and turn it anti-clockwise
2)
GB
(pos. 1) while keeping button (B) pressed, to
light the pilot ligh.
Keep the knob pressed for about 15 sec. to
3)
prime the thermocouple. The pilot light can
also be lit by hand through the hatch(C).
Press the knob (A) and turn it anti-clockwise
4)
(pos.2) to between the minimum and maxi-
mum temperature and wait for the warm-up
time before using the oven (see table).
Temperature °C
Time in minutes
3319970_ut_GB_rev.1

SWITCHING THE TOP BURNER ON AND OFF

and turn it anti-clockwise
(A)
and turn it gradually anti-
(A)
and turn it clockwise (pos. 3)
(A)

SWITCHING THE OVEN ON AND OFF

Min
100 140 180 210 240 270 300
6' 8' 10' 12' 14' 16' 18'
) to
2
4
Max
- 10 -
A
A
3
B
1
A
3
1
2
A
C
2
2
ENGLISH