Table of Contents
Advertisement
ASSEMBLY
Assembling the Manual / Hydraulic Pump
to the Boom (FIGURE 5)
1. Remove the covers, bolt, and nut from the
A
mounting bracket on the boom assembly.
S
2. Unpack the plastic bushing from the patient lift
S
carton.
E
3. Lift-up on the boom and place it on your left
M
shoulder.
B
L
4. Let the hydraulic pump rest on the right-side of
Y
your chest and rotate the shaft extension of the
hydraulic pump assembly until it lines-up with
the mounting bracket holes in the boom
assembly.
5. Turn the plastic bushing 90
shaft extension of the hydraulic pump.
Plastic Bushing
NOTE: Turn 90
FIGURE 5 - ASSEMBLING THE MANUAL / HYDRAULIC PUMP TO THE BOOM
Assembling the Electric Actuator to the
Boom (FIGURE 6)
1. Remove the covers, bolt, and nut from the
mounting bracket on the boom assembly.
2. Unpack the plastic bushing from the patient lift
carton.
3. Lift-up on the boom and place it on your left
shoulder.
ASSEMBLY (Cont.)
o
and place over the
Mounting
Bracket
o
.
WARNING
There are two (2) silver plugs in the mounting
holes next to the hydraulic pump mounting
bracket on the boom. DO NOT remove these
silver plugs and use these holes at anytime or
injury to the patient and/or assistant may
occur (FIGURE 5).
6. Align the holes of the boom assembly mounting
bracket with those of the hydraulic pump and
insert the bolt. Secure with nut.
NOTE: Be sure that the bolt is completely
through the holes of the boom assembly
mounting bracket and the manual / hydraulic
pump assembly. The boom assembly will pivot
easily if the mounting hardware is aligned
properly when the boom assembly is secured
to the mast.
CAUTION
DO NOT overtighten the nut and bolt and bend
the mounting bracket.
NOTE: The bottom of the electric actuator
assembly will already be assembled to the mast
mounting bracket.
4. Let the actuator rest on your right-side of your
chest and rotate the shaft extension of the
actuator assembly until it lines-up with the mount-
ing holes in the boom assembly.
5. Place the plastic bushing over the shaft
extension of the actuator.
10
WARNING
DO NOT use for
mounting.
Mounting
Bracket
Advertisement
Table of Contents
