Table of Contents
Advertisement
INVACARE 9833A WEIGHT MODULE
(DIGITAL SCALE)
The Invacare 9833A Weight Module is a compact
precision scale system designed specifically for the
Invacare Patient Lift System. Completely
self-contained, it interfaces the latest precision strain
gauge transducer technology with signal
conditioning electronics to provide stable, accurate
and repeatable weight data.
Specifications
Weight Range:
375 lbs./170.5 kg
Resolution:
0.1 lbs./0.1 kg
Accuracy:
0.1% + 1 digit of reading
Display:
Liquid Crystal Digital
* Hold:
After one (1) minute. Automatic
Power Down - two (2) minutes.
Size:
3-inches x 3-inches x 4-inches
Weight:
One (1) pound
Power:
Nine (9) volt alkaline battery
Battery Life:
Approximately 3000 readings
Installation
1. Remove the covers, bolt, nut washers, plastic
bushing and spacer that secure the swivel bar
to the boom (FIGURE 1).
Remove existing
hardware
FIGURE 1 - SWIVEL BAR REMOVAL
ACCESSORIES
NOTE: When reassembling the swivel bar
hardware, slide the bolt through the hook of the
weight module.
2. Use the existing swivel bar hardware (except
spacer) and reassemble the weight module to
the boom mounting bracket (FIGURE 2).
NOTE: Washers should be placed against both
sides of the boom mounting bracket to eliminate
damage.
DO NOT overtighten mounting hardware. This will
damage mounting brackets. Brackets MUST pivot.
The bolt threads MUST protrude past the nut to
ensure that locking feature functions.
3. Secure the top of the weight module mounting
bracket to the bottom of the weight module with
the nut, thin washers, spacer and bolt provided
(FIGURE 2).
4. Reattach the swivel bar to the bottom of the
weight module with the bolt and nut provided
(FIGURE 2).
Thick
Washers
Thin
Washers
FIGURE 2 - WEIGHT MODULE INSTALLATION
37
ACCESSORIES
CAUTION
Reassemble
Existing
Hardware
Bottom of
Weight Module
Top of Weight
Module Mounting
Bracket
A
C
C
E
S
S
O
R
I
E
S
Advertisement
Table of Contents
