Table of Contents
Advertisement
CARE AND MAINTENANCE OF YOUR PATIENT LIFT
CARE AND MAINTENANCE OF YOUR PATIENT LIFT
C
Manual / Hydraulic Pump
A
All parts of the Manual / Hydraulic Pump are
R
precision machined, then carefully assembled and
E
-
tested to ensure reliable service. The pump
assembly is completely enclosed and sealed with
M
Neoprene rings to prevent leakage of hydraulic oil.
A
A small amount of oil (about a drop) will accumulate
I
around the piston from time to time and should be
N
T
removed with a facial tissue.
E
N
A
The pump is sealed at the factory and if service
N
is required, the pump unit MUST be returned to
C
the factory for repair. DO NOT attempt to OPEN
E
the pump or obtain local service as this will void
the warranty and might result in damage and
costly repair. Consult your dealer or write
Invacare for information.
MANUAL / HYDRAULIC PUMP OR ELECTRIC
ACTUATOR REPLACEMENT (FIGURE 2).
1. Remove the covers, nut, bolt and plastic bushing from
the boom mounting bracket.
2. Remove the covers, nut, bolt, washers and spacer
from the mast mounting bracket.
3. Reverse steps for installation.
DO NOT overtighten mounting hardware. This will
damage mounting brackets.
WARNING
CAUTION
WARNING
DO NOT use for
mounting.
Mast
WARNING
DO NOT use for
mounting.
Mast
FIGURE 2 - MANUAL / HYDRAULIC PUMP OR
ELECTRIC ACTUATOR REPLACEMENT
34
Boom
Plastic
Bushing
MANUAL / HYDRAULIC
Boom
Plastic
Bushing
ELECTRIC
Advertisement
Table of Contents
