Show Extended Channel Tn3270-Server Dlur - Cisco 11.0 BT Release Notes

show extended channel tn3270-server dlur

show extended channel tn3270-server dlur
Use the show extended channel tn3270-server dlur privileged EXEC command to display
information about the SNA session switch.
Syntax Description
slot/2
Command Mode
Privileged EXEC
Sample Display
The following is sample output on the Cisco 7000 from the show extended channel tn3270-server
dlur command:
Table 7 describes significant fields in the display.
Table 7
Field
DLUR fq-luname
CURRENT DLUS fq-luname
DLUR-DLUS STATUS
dlur-status
PREFERRED-DLUS fq-luname
BACKUP-DLUS fq-luname
PREFERRED SERVER
fq-luname
LSAP
42 TN3270 Server Commands
show extended channel slot/2 tn3270-server dlur
Specifies a particular CIP in the router where slot is the slot number.
The port value for a TN3270 server will always be 2.
router# show extended channel 3/2 tn3270-server dlur
dlur MPX.GOANCP
current dlus MPX.NGMVMPC
preferred dlus MPX.NGMVMPC
preferred server MPX.NGMVMPA
lsap token-adapter 0 5C
link P390
Show tn3270-server dlur Field Descriptions
dlur-dlus status ACTIVE
backup dlus MPX.NGMVMPB
vrn MPX.LAN4
remote 4000.7470.00e7 08
Description
Fully qualified CP name used by the SNA session switch and the
LU name for the DLUR function configured as the fq-cpname on
the dlur statement.
Name of the currently active DLUS, either the primary DLUS or
the backup DLUS.
Possible DLUR-DLUS status values and their meanings are:
• reset—The DLUR-DLUS pipe is reset.
• pnd-actv—The DLUR-DLUS pipe is pending active.
• active—The DLUR-DLUS pipe is active.
• pnd-inac—The DLUR-DLUS pipe is pending inactive.
Name of the DLUS as configured on the DLUR statement.
Name of the DLUS that is used if the preferred DLUS is
unavailable.
Fully qualified name of the preferred network node server.
Configured value for the local SAP on the configured internal
adapter. Token-adapter specifies the type of internal adapter used.
status ACTIVE
status ACTIVE